Iron HeartIH-666SBR-14od 14oz 브로큰 능직물 가장자리 데님 슬림 스트레이트 컷 청바지 - Indigo Overyded Black

Our slim straight jean with a low/medium rise made from our brand new 14oz broken twill selvedge denim. Broken twill denim was first used in 1964 by Wrangler as a solution for combatting leg twist. The process of weaving fabric in this method sees the combination of both right hand twill (RHT) and left hand twill (LHT) reversed every two warp ends, forming a zigzag-like pattern in the denim and leaving no bias in either direction of the weave, therefore eliminating leg twist. Made In Japan - Designed by Shinichi Haraki, handmade by WORKS INC. in Japan 666 Slim Straight Cut - Traditional straight cut styling with an all-around slimmer profile - 
Medium/low rise - Straight leg profile with a slight taper from knee to hem - Classic 5-pocket design 14oz Japanese Broken Twill Selvedge Denim - 100% cotton - Broken twill weave - Indigo rope-dyed warp / white weft - This denim will fade naturally through wear and washing - Post-construction, this garment is overdyed using black sulphur dye - This denim will fade with indigo-tinged hues through wear and washing Hardware & Construction - Traditional 3-button fly - Iron Heart branded tack button at waistband - Works Inc branded pocket rivets - Hidden rivets on rear pockets - Poly/cotton stitching for increased strength - Single and double needle chain stitch construction - Belt loops anchored at three points and sewn into the waistband - Heavy cotton pocket bags and lined rear pockets Selvedge ID - Sideseam, fly, and coin pocket selvedge ID Leather Patch - Lightweight vegetable-tanned steerhide - Stitched on all sides - Dyed Iron Heart graphic - Please note: Continued washing (especially at higher temperatures) may cause shrinkage and deformities Sanforized, One-Washed & Overdyed - Sanforization is a post-weave mechanical process which removes most potential shrinkage from a fabric before garment construction - To further reduce the risk of shrinkage, we wash the completed garment in an aggressive industrial washing machine. - Following this, a high-temperature overdyeing process removes any remaining potential shrinkage - This garment may fit slightly smaller than its non-overdyed counterpart. Please refer to our measurement charts carefully - No further shrinkage is expected if washed in accordance with our guidelines Stretch Details - The waist will stretch out approximately 1" with wear. All other dimensions that are put under pressure will stretch proportionally to the waist Care Guidelines - We recommend washing this garment at 30°C with a low (or no) spin cycle. Hang dry, do not tumble dry